Elna Star Series


Elna Star Series

Some settings for the elna EC, ZZ, SP, ST, TSP. 

Setting the hook timing

If you timing is not set correctly or very fine it will/could cause skipped stitches on stretch material.(On the zig zag stitch it will normally skip on the right stitch) When the needle is on its far most left the hook point should just pass above the needle hole. The hook point should almost touch the needle when it passes above the needle hole. It is easier to check with the needle threaded. This is a good way to check if you don't have the gauge.
Setting the hook timing






1 comment:

  1. Hello, Just bought on of these (Special Cl 31) at an English auction but the electrical plug has been cut off. Was going to put a new one on it but it has two wires, one black and one blue do you know which one is the neutral one and which one is the live one? Your help would be appreciated. Just found your blog asked the same question on your Utube video, sorry for the duplicate not sure which one to ask the question so did both. Many thanks Sharon

    ReplyDelete

Please ask your questions here.